Filter
Top Products
Page 6
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Installation
• Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive
material like plastic.
• Make sure the camera has enough open space around it to facilitate the free flow of air.
Please contact JAI, Inc. at (800) 445-5444 or send an email to imaging@jai.com if you have any
questions.
2.2.2 Connector Pin Configurations
2.2.2 (a) 12-Pin Connector (TM-2016-8)
The TM-2016-8 has a 12-pin Hirose connector for power input, serial
communication, and signal integration. Pin #1 is Ground and Pin #2 is
+12V DC. Other pins handle a number of input and output functions, as
shown in Table 1 below.
TABLE 1. 12-Pin Connector (TM-2016-8)
Pin Description Pin Description
1 GND (power) 7 VD In
2 +12V DC 8 N/C
3 GND (analog) 9 HD In
4 Video Out 10 RXD (RS-232)
5 GND (digital) 11 Integration Control
6 VINIT In 12 TXD (RS-232)
1
2
3
4
5
6
9
8
7
11
12
10