Filter
Top Products
Camera Features 47
EN Camera
Series
To enable the HDR mode,
1. Start ENSetup software.
2. Open Video WIndow.
3. Right-click the camera icon, and select "Manual Exposure” menu item.
4. Click HDR mode check box and “Save in Camera” button. To disable HDR mode, uncheck the
box and click “Save in Camera” button.
If HDR mode is enabled, set the target grayscale of the license plate to 190~200DN, during the
installation, by adjusting “ADR A side Gain” (daytime), and “ADR A side Offset” (night time). See
section 6.3.1 for detail.
6.4 Flash/Nighttime Light Control
The strobe and continuous nighttime light controls are critical at nighttime. ADR (Automatic
Dynamic Range) control inside the EN automatically turns on and off the strobe and night light based