JVC 137 Security Camera User Manual


 
admin:jvc
Base64 encoding of this string yields YWRtaW46anZj. Enter this in the Authorization line. Default password for
each username is jvc.
3) The camera returns a response to the client. In the following example, current subnet mask is 255.0.0.0. In
addition, 255.0.0.0 is followed by & and 200 OK, indicating that getting parameter is successful.
Example
HTTP/1.1 200 OK<CRLF>
Connection: close<CRLF>
Content-Length: 80<CRLF>
Content-type: text/plain<CRLF>
Date: Fri, 13 MAY 2011 07:33:12 GMT<CRLF>
Server: JVC VN-H37 API Server<CRLF>
network.interface.subnetmask=255.0.0.0&200 OK<CRLF>
4) The client disconnects TCP80 to end the use of API.
Note: APIs for getting/setting parameters are not restricted by the access restriction function.
7.2. Getting Parameter
Specify API in GET line according to the format below when getting a parameter from the camera.
/api/param?ParamA.ParamB.ParamC
It is possible to get multiple parameters at a time. Connect parameters with &. Do not insert space before and after
&.
/api/param?ParamA.ParamB.ParamC&ParamA.ParamD.ParamE
The upper limit of this character string is 1024 bytes. The maximum number of parameters that can be acquired at
a time is 15. Status settings, i.e.
network.interface.status, network.dns.status, network.ntp.status, etc.,
can not be
acquired at a time.
When acquisition is successfully completed, values will be shown in the body of HTTP response, followed by
"&200 OK" message.
Example:
ParamA.ParamB.ParamC=Data&200 OK