Filter
Top Products
Example of Response application.pop.user&200 OK
Interpretation Change the user name setting of the POP server. The maximum user name size is 64 bytes. Set
as follows when this is to be left blank.
/api/param?application.pop.user=%00
The user name is used as local part of sender mail address when sender mail address setting is blank. When the
user name is blank, the local-part is set to "vn_h37". When POP before SMTP is disabled, it is not necessary to
set POP server settings other than POP user name setting.
Example of setting /api/param?application.pop.user=somename
Example of Mail Address somename@somecompany.com
Following characters must not be used in user name.
space
( ) < > [ ] : ; ¥ ,(comma)
Allowed users admin, operator
Setting POP Server Password
Format /api/param?application.pop.password=data
Example /api/param?application.pop.password=someword
Example of Response application.pop.password&200 OK
Interpretation Change the password setting of the POP server. The maximum password size is 32 bytes. Set as
follows when this is to be left blank. /api/param?application.pop.password=%00
Allowed users admin, operator
(Note: There is no API for reading passwords.)
Getting FTP Server Address Setting
Format /api/param?application.ftp.host
Example of Response application.ftp.host=192.168.0.200&200 OK
Response example when setting field is left blank application.ftp.host=&200 OK
Interpretation Acquire the FTP server address setting used for FTP transmission via alarm.
Allowed users admin, operator, user
Setting FTP Server Address
Format /api/param?application.ftp.host=data
Example /api/param?application.ftp.host=10.0.0.200
Example of Response application.ftp.host&200 OK
Interpretation Change the FTP server address setting used for FTP transmission via alarm. Specify the IP
address or FQDN. The maximum FQDN size is 63 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is
also possible to leave the setting field blank as follows. /api/param?application.ftp.path=%00