Filter
Top Products
Getting Alarm Trigger
Format /api/param?application.event(Number).trigger
Example When Getting Trigger of Alarm No. 1
/api/param?application.event(1).trigger
Example of Response application.event(1).trigger=m1&200 OK
Interpretation Acquire Trigger of the alarm action for the specified alarm number. Up to 5 alarm actions can be
specified, periodic FTP is assigned to event No.6, pre/post FTP assigned to No.7, SD Card constant recording to
event No.8 and SD Card alarm recording to No.10. Therefore the number of event(number) can be set between
the range of 1 to 8 and 10. Note that alarm numbers are different from the alarm input pin numbers.
When only 1 Trigger is set:
m1 will be returned in the case of make for alarm input 1. [VN-H57/157WP/257/257VP Only]
b1 will be returned in the case of break for alarm input 1. [VN-H57/157WP/257/257VP Only]
m2 will be returned in the case of make for alarm input 2. [VN-H57/157WP/257/257VP Only]
b2 will be returned in the case of break for alarm input 2. [VN-H57/157WP/257/257VP Only]
camera.position(num).status will be returned for preset position. "num" is from 0 to 19.
v1 will be returned for motion detection of video.
audio_detect1 will be returned for audio detection1. [VN-H57/157WP/257/257VP Only]
audio_detect2 will be returned for audio detection2. [VN-H57/157WP/257/257VP Only]
tampering_detect will be returned for tampering detect of video.
ncbwe will be returned for IR filter ON.
ncbws will be returned for IR filter OFF.
i(second) will be returned for periodic FTP trigger.
time/hhmmss will be returned for time trigger.
When a combination of 2 Triggers are set, responses such as m1(10)b2 will be returned. The example indicates
that trigger will be activated when break is invoked at alarm input 2 within 10 seconds after make is invoked at
alarm input 1.
Example of Response application.event(1).trigger=m1(100)b2&200 OK
Allowed users admin, operator
Setting Alarm Trigger
Format /api/param?application.event(Number).trigger=data
Example When setting Trigger of Alarm No. 1
/api/param?application.event(1).trigger=m1
Example of Response