Filter
Top Products
Setting POP Server Address
Format /api/param?application.pop.host=data
Example /api/param?application.pop.host=192.168.0.200
Example of Response application.pop.host&200 OK
Interpretation Change the address setting of the POP server. Specify the IP address or FQDN. The maximum
FQDN size is 63 bytes. Specify as 0.0.0.0 when the POP server is not set. It is also possible to leave the setting
field blank as follows. /api/param?application.pop.host=%00
Allowed users admin, operator
Getting POP Server Port Number Setting
Format /api/param?application.pop.port
Example of Response application.pop.port=110&200 OK
Interpretation Acquire the port number setting of the POP server.
Allowed users admin, operator, user
Setting POP Server Port Number
Format /api/param?application.pop.port=data
Example /api/param?application.pop.port=110
Example of Response application.pop.port&200 OK
Interpretation Change the port number setting of the POP server.
Allowed users admin, operator
Getting POP Server User Name Setting
Format /api/param?application.pop.user
Example of Response application.pop.user=somename&200 OK
Response example when setting field is left blank application.pop.user=&200 OK
Interpretation Acquire the user name setting of the POP server. The user name is used as local part of sender
mail address when sender mail address setting is blank. When the user name is blank, the local-part is set to
"vn_h37".
Example of Response application.pop.user=somename&200 OK
Example of Mail Address somename@somecompany.com
Allowed users admin, operator, user
Setting POP Server User Name
Format /api/param?application.pop.user=data
Example /api/param?application.pop.user=somename