Filter
Top Products
36
Item Content
DC GAIN Adjusts operating speed of the DC auto iris lens.
Adjust according to the lens used.
Increasing the value: the speed will increase
[Setting range: 0 ~ 60 (default setting) ~ 255]
* Depending on the lens, hunching may occur
when setting this value too high. In this case,
lower the value.
DC OFFSET Standard level (brightness) for controlling the DC
auto iris operation is set.
Increasing the value: the screen will become darker
[Setting range: 100 ~ 120 (default setting) ~ 150]
CAMERA TITLE Default setting: OFF
Whether to display the camera title is set.
OFF : Camera title is not displayed.
ON : Camera title is displayed.
V PHASE
Vertical phase during line lock is adjusted. The vertical phase can be
adjusted to other cameras. This setting is enabled when the LL/INT
switch on the back of the unit is set to LL.
5.
When selecting EXIT and press-
ing the SET button, the screen will
return to the CAMERA SET-
TINGS screen.
● Press the SELECTOR button in
the horizontal direction (8 or t)
to set. Pressing in the button to
the right (t) will advance the
phase and pressing to the left (8)
will delay the phase.
LENS
EXIT
CAM TITLE OFF
CAM
E
E
R
R
A
A
VPHASE
TITLE EDIT
ADJUST ..
084 401
C— — — — — —AMERA ISETT NGS
Set value