Filter
Top Products
17
TW
Remote Control Unit
You can use the RM-V708U to control the camcorder when it’s attached to the Docking Station.
Installing The Battery
The RM-V708U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
Operation Buttons
(੬ pg. 56, 66)
INSERT Button (੬ pg. 66)
UP Button (੬ pg. 56)
MBR SET Button (੬ pg. 59)
AUDIO MONITOR
Button (੬ pg. 65)
DOWN Button (੬ pg. 56)
A. DUB Button (
੬ pg. 65)
R.A. EDIT Buttons (
੬ pg. 60)
PAUSE IN connector (
੬ pg. 60)
ZOOM Buttons (
੬ pg. 56)
DISPLAY Button (੬ pg. 65)
SHIFT Button (੬ pg. 56)
SLOW Rewind/Forward
Buttons (੬ pg. 53)
LEFT/RIGHT Buttons
(
੬ pg. 56)
FADE/WIPE Button
(੬ pg. 60)
EFFECT ON/OFF
Button (੬ pg. 57)
EFFECT Button
(੬ pg. 57)
RECORDING START/STOP Button (੬ pg. 66)
POWER ON/OFF Button
When the camcorder’s Power
Dial is set to “PLAY”, you can
turn the unit’s power on and off
using the RM-V708U.
CANCEL Button (
੬ pg. 61)
Knob