JVC GR-DVM1 Digital Camera User Manual


 
31
WIDE MODE
ZOOM
DIS
GA IN UP
TO FADER / W IPE MENU
TO P.AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU
W.BALANCE
END
OFF
20X
OFF
AGC
ITEM –/+ BUTTON
SET MENU BUTTON
A
AUTO
DIS (Digital Image Stabilizer)
When recording while holding the camcorder in
your hand, or when shooting a subject with little or
no contrast, subtle hand movements will cause
shakiness in the recorded image.
ON–Compensates for relatively small shakes that
occur when shooting close up. “ ” appears in the
LCD monitor during recording. *This function is
usable when the shooting mode selector is set to
"MANUAL".
OFF–When shooting with the camcorder in a fixed
position or on a tripod, set the Stabilizer to “OFF”.
If you leave it on and then move or turn the camera
to follow a moving subject, unnecessary
compensation occurs and this can result in an
unnatural recorded image.
NOTES:
The Stabilizer cannot compensate for drastic hand
movements while shooting.
The Stabilizer will not work when certain
P.AE/ Effects (Classic Film, Strobe, Slow 1, 2
pg. 41) and Fade/Wipe Effects (Picture Wipe/
Dissolve
pg. 36) are activated. The “
indicator appears blinking in the LCD monitor.
ZOOM Magnification
You can select 10x, 20x, or 100x zoom
magnifications.
10x–Optical zoom that does not degrade the quality
of the recording.
20x–Electronic processing (Digital zoom) that lets
you get closer up.
100x–Electronically-processed images at 100-times
magnification.
GAIN UP
Bright, natural recordings can be taken even in
areas with low or poor lighting.
A
–The shutter speed is automatically adjusted
(1/30 — 1/200 sec.). Shooting a subject in low or
poor lighting at 1/30 sec. shutter speed provides a
brighter image than in the AGC mode, but the
subject’s movements are not smooth nor natural.
OFF–Select this setting when lighting is not a
problem.
AGC–This is the factory setting, and is automatically
activated during Auto operation. The overall
appearance is jagged, but the image is bright and
the movements are more natural than in “
A
mode.
WIDE MODE
This recording mode is compatible with wide-screen TVs
(16:9 aspect ratio). When using this mode, please refer to
your wide-screen TV’s instruction manual.
SQUEEZE–For playback on TVs with an aspect ratio of
16:9. Naturally expands the image to fit the screen without
distortion.
appears in the LCD monitor. During
playback/recording on 4:3 TVs/LCD monitors, the image is
elongated vertically.
CINEMA–Inserts black bands at the top and bottom of the
screen. During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are cut and the
screen ratio becomes 16:9. During playback/recording on
4:3 TVs/LCD monitor, black bands are inserted at the top
and bottom of the screen and the image appears like a
letterboxed 16:9 movie.
OFF–Select “OFF” when you don’t want to use either of the
above modes (first set the shooting mode selector to
"MANUAL"). *During Full-Auto operation, both Squeeze
and Cinema modes are unusable.
A discriminating signal is automatically recorded when you
select either “SQUEEZE” or “CINEMA” for recording. If
your wide TV has the automatic discriminating function,
connect an S-Video cable between S2 connector on the TV
and the S-Video output connector on the Docking Station.
During playback, the image is naturally expanded to fit the
wide screen, with no proportional distortion.
If your wide screen TV has no S2 connector, automatic
signal discrimination can not be performed, and it should
be done manually.
NOTES:
When playing back through a video cassette recorder, or
to a wide-screen TV, that doesn’t have the automatic
discriminating function, change the setting on the TV
manually.
When playing back a tape recorded in Squeeze and
Cinema, Squeeze cannot be distinguished from Cinema
during fast-forward or rewind.
OFF
AGC
10X
20X
100X
OFF
SQUEEZE
CINEMA
ON
OFF
AUTO