JVC DVL367 Digital Camera User Manual


 
EN
23
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
pg. 9).
To monitor the picture and sound from the camcorder
without inserting a tape or memory card*, set the
camcorders Power Switch to
AUTO
or
M
AN
UAL
,
then set your TV to the appropriate input mode.
* GR-DVL767/DVL367/DVL365 only
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when
the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
While the Audio/Video cable is connected to the AV
connector, sound cannot be heard from the speaker.
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown
in the illustration ( pg. 22).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3 Connect the VCR output to the TV input, referring
to your VCRs instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time
..... set DATE/TIME to AUTO, ON or OFF in the
Menu Screen ( pg. 50).
Or, press DISPLAY on the remote control
(provided) to turn on/off the date indication.
Time Code
..... set TIME CODE to ON or OFF in the Menu
Screen ( pg. 50).
Playback Sound Mode, Tape Speed And Tape
Running Displays for tape playback
..... set ON SCREEN to LCD or LCD/TV in the
Menu Screen ( pg. 50).