JVC DVL367 Digital Camera User Manual


 
42
EN
Snapshot (For Tape Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1 Set the VIDEO/MEMORY Switch to VIDEO
(GR-DVL767/DVL367/DVL365 only), then set the
Power Switch to
M
ANUA
L
while pressing down the
Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select
CAMERA. Press it and the CAMERA Menu appears.
4 Rotate the MENU/BRIGHT wheel to select
SNAP MODE, then press it.
5 Rotate the MENU/BRIGHT wheel to select the
desired Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select
RETURN and press it twice. The Menu Screen
closes.
SNAPSHOT RECORDING
1 Press SNAPSHOT. PHOTO appears while the
snapshot is being taken.
If you press during Record-Standby . . .
..... PHOTO appears and a still image will be recorded
for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.
If you press during Recording . . .
..... PHOTO appears and a still image will be recorded
for approx. 6 seconds, then the normal recording
resumes.
Regardless of the Power Switch position (
AUTO
or
MANUAL
), Snapshot recording takes place using the
selected Snapshot mode.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar
to serial photography. (Interval between still images:
approx. 1 second)
NOTES:
To remove the shutter sound, BEEP on pg. 46, 48.
If Snapshot recording is not possible, PHOTO blinks
when SNAPSHOT is pressed.
If Programme AE with special effects ( pg. 38) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such
a case, the icon blinks.
If SNAPSHOT is pressed when DIS is set to ON
(
pg. 47), the Stabiliser will be disabled.
The Motor Drive mode is disabled when REC
SELECT is set to
/ in the Menu Screen
(
pg. 49).
If REC SELECT is set to
/ in the DSC
Menu Screen, still images are recorded on the memory
card as well (640 X 480 pixels).
During tape playback as well, all snapshot modes are
available when
COPY is set to OFF in the
Menu Screen (
pg. 50). However, the shutter sound
is not heard.
During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
FOR RECORDING
(cont.)
SNAP MODE
PINUP
FRAME
FULL
SNAPSHOT Button
Lock Button
VIDEO/MEMORY Switch
(GR-DVL767/DVL367/
DVL365 only; open the
LCD monitor to access
this switch.)
Display
Menu Screen
There is the sound effect of a shutter closing.
FULL
Snapshot mode
with no frame
FRAME
Snapshot mode
with frame
PIN-UP
Pin-Up mode
Power Switch
GR-DVL767/DVL367/
DVL365 only