JVC DVL367 Digital Camera User Manual


 
EN
45
White Balance Adjustment
A term that refers to the correctness of colour
reproduction under various lighting. If the white
balance is correct, all other colours will be accurately
reproduced.
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional colour/tint reproduction.
1 Set the Power Switch to
M
ANUAL
while pressing
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3 Rotate the MENU/BRIGHT wheel to select
W.BALANCE, then press it. The W.BALANCE
Menu appears.
4 Rotate the MENU/BRIGHT wheel to select the
desired mode.
AUTO ................. White balance is adjusted
automatically (factory preset).
MWB ............ White balance is set manually.
FINE............. Outdoors on a sunny day.
CLOUD........ Outdoors on a cloudy day.
HALOGEN ... A video light or similar type of
lighting is used.
5 Press the MENU/BRIGHT wheel in. Selection is
complete. Press the MENU/BRIGHT wheel in again.
The Menu Screen closes and the selected mode
indicator except AUTO appears.
To Return To Automatic White Balance . . .
..... select AUTO in step 4. Or, set the Power Switch
to
AUTO
.
NOTE:
White balance cannot be used when Sepia or Monotone
(
pg. 39) is activated.
Manual White Balance Operation
Perform Manual White Balance when shooting under
various types of lighting.
1 Follow steps 1 through 4 of the white balance
adjustment, and select MWB.
2 Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
3 Press the MENU/BRIGHT wheel in until
begins blinking rapidly.
When the setting is completed, resumes normal
blinking.
4 Press the MENU/BRIGHT wheel in twice. The
Menu Screen closes and the Manual White Balance
indicator is displayed.
NOTES:
In step 2, it may be difficult to focus on the white paper.
In such a case, adjust focus manually (
pg. 43).
A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the colour temperature is different
depending on the light source, the subject tint will differ
depending on the white balance settings. Use this
function for a more natural result.
Once you adjust white balance manually, the setting is
retained even if the power is turned off or the battery
removed.
White paper
Power Switch
MENU/BRIGHT Wheel