JVC DVL367 Digital Camera User Manual


 
52
EN
DUBBING
Dubbing To A VCR
1 Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 22 and 23.
2 Set the VIDEO/MEMORY Switch to VIDEO (GR-
DVL767/DVL367/DVL365 only), then set the
camcorders Power Switch to PLAY while pressing
down the Lock Button located on the switch, turn on
the VCRs power, and insert the appropriate
cassettes in the camcorder and the VCR.
3 Engage the VCRs AUX and Record-Pause modes.
4 Engage the camcorders Play mode to find a spot
just before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
5 Press
4
/6 on the camcorder and engage the
VCRs Record mode.
6 Engage the VCRs Record-Pause mode and
press
4
/6 on the camcorder.
7 Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when finished.
NOTES:
As the camcorder starts to play your footage it will
appear on your TV. This will confirm the connections
and the AUX channel for dubbing purposes.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video
cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time
..... set DATE/TIME to AUTO, ON or OFF in
the Menu Screen ( pg. 50).
Or, press DISPLAY on the remote control
(provided) to turn on/off the date indication.
Time Code
..... set TIME CODE to ON or OFF in the Menu
Screen ( pg. 50).
Playback Sound Mode, Tape Speed And Tape
Running Displays
..... set ON SCREEN to LCD or LCD/TV in the
Menu Screen ( pg. 50).
* When connecting the cables, open this cover.
** Connect when an S-Video cable is not used.
VCR
Connector cover*
TV
To AV
To
S-VIDEO
S-Video cable
(optional)
Power Switch
To AUDIO, VIDEO**
and
-IN
connectors
Y/C/CVBS
video out
select switch
Cable Adapter (provided)
If your VCR has a SCART
connector, use the
provided cable adapter.
Audio/Video cable
[mini-plug to RCA plug]
(provided)