Filter
Top Products
EN
71
CONTINUED ON NEXT PAGE
• The light used to illuminate the LCD
monitor causes it to become hot.
• This may occur when the surface or
the edge of the LCD monitor is
pressed.
• Certain Fade/Wipe effects, certain
modes of Programme AE with
special effects, “DIS” and other
functions that cannot be used
together are selected at the same
time.
• The LCD monitor and the view-
finder are made with high-precision
technology. However, black spots or
bright spots of light (red, green or
blue) may appear constantly on the
LCD monitor or the viewfinder.
These spots are not recorded on
the tape. This is not due to any
defect of the unit. (Effective dots:
more than 99.99 %)
• This is normal.
• The Power Switch is set to “
AUTO
”
or “
M
ANUAL
”.
• Close the LCD monitor to turn it off
or set the Power Switch to “OFF”,
and let the unit cool down.
————
• Re-read the sections covering
Fade/Wipe effects, Programme AE
with special effects and “DIS”
(੬ pg. 38 – 41, 47).
————
————
• Set the Power Switch to “PLAY”
(੬ pg. 21).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
w The rear of the LCD monitor
is hot.
e The indicators and the
image colour on the LCD
monitor are not clear.
r The LCD monitor or
viewfinder indications blink.
t Coloured bright spots
appear all over the LCD
monitor or the viewfinder.
y During recording, sound
cannot be heard.
u Play, Rewind and Fast-
Forward functions do not
work.