Filter
Top Products
7
Precautions
● Do not damage or modify the power cable. Doing so
could result in current leakage or electric shock.
● To protect the camera and avoid electric shock
hazards, always disconnect the power cord of the AC
power adapter from the AC outlet when the camera is
not in use for an extended period.
● Make sure that no flammable objects, water, or bits
of metal get inside the unit. These could damage the
unit or cause a malfunction.
● Whenever an anomaly (unusual noise, smell or
smoke) occurs, immediately turn off the main unit's
power, unplug the power cord, and consult your
nearest JVC dealer.
● Never use digital equipment such as portable tele-
phones or video cameras when using this unit as this
may cause a malfunction.
Handling precautions
● For extended product life, avoid using and storing the
unit in places subject to the following conditions:
• extreme heat or cold
• vibrations
• dust or soil
• high humidity
• strong noise source
● The environmental temperature under which this unit
can be operated is limited by the image sensing
device. Use this unit within an environmental
temperature range of from +5˚C to +35˚C (41˚F to
95˚F).
● Avoid strong vibrations or violent shocks to this unit
during installation or transportation.
● If the power voltage is too high or too low, the service
life of this unit may be decreased and optimum
performance may not be assured.
● Do not plug in or unplug the camera cable connector
while this unit turned on. Doing so could cause a
malfunction.
● Wipe the cabinet clean with a soft cloth. To remove
excessive dirt, clean the unit with a soft cloth dipped
in a mild detergent diluted with water. Wring out any
excess liquid before wiping. Use a dry cloth to dry
the unit. Do not use a volatile liquid such as ben-
zene, thinner or alcohol. These may damage the
cabinet surface or the coating.
● Be sure to use this unit in combination with the
components described in “Micro HD camera system
component list” on page 24. Do not use this unit near
strong radio sources such as a radio, TV or portable
phone, or near devices that produce a strong electro-
magnetic field such as a transformer or motor as this
may generate noise in the picture or cause changes
in image colour.
● Do not bring an electronic scalpel or other sources of
electronic noise near this product. Doing so can
interfere with the monitor display.
● When using a wireless microphone and receiver with
this unit, check them beforehand to ensure that noise
does not enter the wireless receiver.
Safety precautions
If a problem develops concerning the
operation of this product while it is being
employed as an endoscopy system during
surgery, etc., take the appropriate action as described
below:
● Problem with the endoscope
The lamp for the light source may have been
burned out. Please read the operating manual for
details on replacing the lamp.
● Problem with the Micro HD Camera
If a problem with the operation of the monitor
screen develops and the normal screen is no
longer displayed, turn the power off and then turn
the power back on again.
● Check the following items before using the product.
(1) Make sure that the product is grounded properly.
(2) Make sure that all of the cords are connected
properly.
(3) When using this product in conjunction with other
equipment, consult a specialist in order to mini-
mize any risk of misoperation or misdiagnosis.
(4) Make sure that the product has been sterilized.
● Pay attention to the following while using the product.
(1) Make sure that the patient is not experiencing any
distress.
(2) Make sure that all of the equipment is operating
correctly.
(3) Make sure that the patient does not touch the
product.
● Pay attention to the following after using the product.
(1) Following the prescribed procedure, return the
product to its original state before it was used,
and then turn the power off.
(2) When disconnecting the cords, do not pull on the
cords with undue force.
(3) Storage location
• Avoid locations where the product may get wet.
• Avoid locations with extremes in air pressure,
temperature, or humidity; poor ventilation;
exposure to direct sunlight; high levels of dust;
high levels of chlorine or sulfur compounds.
• Avoid storing the product on an unstable
surface; for example, one that is on a slope or is
exposed to vibration or physical shocks.
• Avoid storing the product in a location that is used
to store chemicals or where gases are present.
● Clean the product, its accessories, and the cords so
that they are ready for use the next time that they are
needed.
● If the product malfunctions, do not attempt to repair it
yourself. Place a label on it that clearly indicates that
it is “out of order” and contact a repair specialist.
● Do not attempt to modify the product.
● Equipment not suitable for use in the presence of a
flammable anaesthetic mixture with air or oxygen or
nitrous oxide.