Filter
Top Products
EN
37
SYSTEM CONNECTIONS
“ACCESSING FILES” appears on the LCD monitor
while the PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
OFF
(
CHARGE
)
PLAY
4
y
To DV @
To USB
connector
DV cable
(optional)
To DV
connector
USB cable
(provided)
To USB
9
PC with DV
connector
PC
Core filter
Core filter
[A] Using USB cable
(GR-D90/D70 only)
[B] Using DV cable
Connection To A Personal Computer
[A] Using USB cable (GR-D90/D70 only)
This camcorder can transfer still images to a PC via
USB connection.
[B] Using DV cable
It is also possible to transfer still images to a PC with a
DV connector by using software equipped with the PC
or commercially available software.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3 For GR-D90/D70 Owners: If you are using the USB
connection, set the VIDEO/DSC switch 4 to “DSC”.
4 Turn the camcorder’s Power Switch y to “PLAY”
while pressing down the Lock Button t located on the
switch and turn on the PC.
• Refer to the instruction manual of the software on how
to transfer a still image to the PC.
5 When finished, turn off the PC first, then the
camcorder.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the bundled
software and drivers.
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack (੬ pg. 7).
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
● If the PC connected to the camcorder via the USB cable
is not powered, the camcorder does not enter the USB
mode.
● The date/time information cannot be captured into the
PC.
● Refer to the instruction manuals of the PC and Software.
● The still images can also be transferred to a PC with a DV
connector-equipped capture board.
● When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC, or use the DV cable provided with the capture
board.
● The system may not work properly depending on the PC
or capture board you are using.
● When using the DV connection refer to manufacturer
instructions of your capture board for driver’s installation
and operation instructions.
OR
1 GR-D90/70/30US EN 35-37 02.11.6, 3:14 PM37