Filter
Top Products
EN47
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder’s remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press MENU/BRIGHT. The Playback Menu appears.
5
Move the highlight bar to “SYNCHRO” by rotating
MENU/BRIGHT, then press it. The value for
“SYNCHRO” is highlighted.
6
Based on the diagnostics performed (੬ pg. 46), you
can now increase the VCR’s speed by rotating
MENU/BRIGHT downward. You can also slow down
the VCR’s speed by rotating MENU/BRIGHT upward.
The adjustment range is from –1.3 to +1.3 seconds, in
0.1-second increments.
7
Press MENU/BRIGHT twice.
Now perform Random Assemble Editing beginning
with step 4 on page 43.
NOTES:
●
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
●
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
ON
OFF
DISPLAY
TIME CODE
END
SOUND1
0 . 0
ON
FULL SOUND48kHz MODE
32kHz MODE
INDICATION
SYNCHRO
4
ON
OFF
DISPLAY
TIME CODE
END
SOUND1
0 . 0
ON
FULL SOUND48kHz MODE
32kHz MODE
INDICATION
SYNCHRO
4
Playback Menu
Display
MENU/BRIGHT Dial
VCR
(Recording deck)
TV