Filter
Top Products
6 EN
GETTING STARTED
Power
This camcorder’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
CHARGING THE BATTERY PACK
1
Make sure you unplug the camcorder’s DC cord from
the AC Power Adapter/Charger. Plug the AC Adapter/
Charger’s power cord into an AC outlet. The POWER
indicator lights.
2
Remove the battery pack’s protective cap. Attach the
battery pack with its long groove pointing toward the
indicator side of the battery pack mount on the AC
Power Adapter/Charger. The CHARGE Indicator
begins blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking but stays
lit, charging is finished.
4
Slide the battery in the opposite direction of the arrow
and lift off. Remember to unplug the AC Adapter/
Charger’s power cord from the AC outlet.
To AC outlet
POWER indicator
CHARGE indicator
Battery pack BN-V207U or BN-V214U
DC OUT connector
AC Power
Adapter/Charger
AA-V20EG or
AA-V20EK
NOTES:
●
Perform charging where the temperature is between 10° and 35°C. 20° to 25°C is the ideal temperature
range for charging. If the environment is too cold, charging may be incomplete.
●
Charging times noted above are for a fully discharged battery pack.
●
Charging time varies according to the ambient temperature and the status of the battery pack.
●
To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
●
If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the
camcorder and charging stops.
●
Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
●
When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
●
If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
Lithium-ion is vulnerable in colder
temperatures.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a
fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short
circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold
temperatures (below 10° C), its usage time becomes
shorter and it may cease to function. If this happens, place
the battery pack in your pocket or other warm, protected
place for a short time, then re-attach it to the camcorder.
As long as the battery pack itself is not cold, it should not
affect performance.
(If you’re using a heating pad, make sure the battery pack
does not come in direct contact with it.)
Battery pack
BN-V207U
BN-V214U (optional)
Charging time
approx. 1 hr. 30 min.
approx. 3 hrs.