Filter
Top Products
13
10°
5m(16.4ft)
10°
30°
30°
2
1
3
4
5
6
@
!
0
9
8
7
Buttons
Functions
With the camcorder’s power switch With the camcorder’s power switch set
set to “CAMERA”. to “PLAY”.
1 Infrared beam Transmits the beam signal.
transmitting window
2 ZOOM (T/W) buttons Zoom (invariable speed, ੬ pg. 15) —
3 PLAY button — Playback start (੬ pg. 30)
4 STOP button — Stop (੬ pg. 30)
5 REW button Retake (Rewind) (੬ pg. 15) Rew/Rew Shuttle Search (੬ pg. 30)
6 INSERT button — Insert Editing (੬ pg. 36)
7 START/STOP button Functions same as the Recording Start/Stop button of the camcorder.
8 INT. TIME button Self-Timer(੬ pg. 26)/Time Lapse (੬ pg. 27) —
9 REC TIME button Animation/Time lapse (੬ pg. 27) —
0 PAUSE button — Pause (੬ pg. 31)
! FF button Retake (Forward) (੬ pg. 15) FF/FF Shuttle Search (੬ pg. 30)
@ A. DUB button — Audio dubbing (੬ pg. 37)
Remote Control Unit
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (PLAY, STOP, PAUSE, FF, and REW) of your
VCR. This remote control unit makes additional
recording functions possible.
Before use, refer to the instruction booklet.
PULL OUT BATTERY HOLDER
1
Pull out the battery holder by inserting a pointed
instrument into slot
A
.
INSERT BATTERY
2
Insert the lithium battery *(CR2025), with its plus (+)
side up, into the battery holder.
REPLACE BATTERY HOLDER
3
Insert the battery holder into the remote control unit,
and push the holder until it clicks in place.
*Read warning on lithium battery (
੬ pg. 2).
The transmitted beam may not be effective or
may cause incorrect operation when the
infrared beam sensor window is directly
exposed to sunlight or powerful lighting.
Infrared beam
sensor window
Infrared beam
effective area
1
2
3
A