Filter
Top Products
11
T30 SP
T20 SP
T40 EP
T20 EP
T30 SP
T40 SP T30 EP
Viewfinder Adjustment
POSITION VIEWFINDER
1
Adjust the viewfinder manually for best viewability
(see illustration at left).
SELECT MODE
2
Set the power switch to CAMERA.
ADJUST DIOPTER
3
Turn the diopter adjustment control until the
indications in the viewfinder are clearly focused.
Tape Length/Recording Mode Setting
SET TAPE LENGTH
1
Set the tape length button according to the length of
the tape used. T20 = 20 minutes of recording time,
T30 = 30 minutes, and T40 = 40 minutes (in SP).
SET RECORDING MODE
2
Set depending on your preference. “SP” (Standard
Play) provides higher picture and sound quality and
is better for dubbing, while “EP” (Extended Play) is
more economical, recording at 1/3 the speed of SP.
NOTES:
●
The tape remaining time indicator is correct only if the
correct tape length has been selected (
੬
pg. 15).
●
If the recording mode is switched during recording,
the playback picture will be blurred at the switching
point.
●
When the power switch is set to CAMERA and the LCD
monitor is opened at an angle of 60 degrees or more,
the LCD monitor switches on and the viewfinder
switches off automatically to save power.
SP-EP recording mode and
T20•30•40 tape length select button
Set POWER to "CAMERA".
Tape length and recording mode indicator
LCD monitor or
viewfinder