Filter
Top Products
21
Date/Time Insert
This feature allows you to display the date and time in your
viewfinder or the LCD monitor and on a connected TV.
NOTE:
You should already have performed the Date/Time
Setting procedure (
੬
pg. 11). If you haven’t, do so
before continuing.
DISPLAY
CHOOSE DISPLAY MODE
1
Press DISPLAY during Record–Standby to cycle
through the available modes as shown in the
illustration at left.
NOTES:
●
The selected display can be recorded.
●
If you don't want to record the display, select Date-off
mode before shooting.
●
If you want to delete the display during shooting, press
DISPLAY.
●
If you want to call back a deleted display, engage the
Record-Standby mode and then press DISPLAY to
select the desired display mode.
RECORDING
Advanced Features
DEC 25.96
PM 3:29:43
Date display
Time display
Date/Time display
Date/Time-off mode
Date display
DEC 25.96
DEC 25.96
PM 10:59:20
Date/Time display
Time display
PM 10:59:20
LCD monitor
or viewfinder
DISPLAY
Quick Rec
Records a scene for 5 seconds, providing quick scene
transitions like those seen in TV programmes.
1
During Record–Standby, press and release QUICK
REC. Recording starts, and after 5-second
recording is finished, the camcorder reenters the
Record–Standby mode automatically.
•To continue shooting longer than 5 seconds,
press and hold QUICK REC. Recording continues
as long as QUICK REC is kept pressed.
NOTES:
●
The Fader (
੬
pg. 28) cannot be activated by pressing
QUICK REC.
●
QUICK REC cannot be used during Animation and
Time-Lapse (
੬
pg. 35, 36).
QUICK REC