Filter
Top Products
35
JLIP ID NO. 07
Tally ON
Interval Timer OFF
Rec Time OFF
Tele Macro OFF
Gain Up AGC
Color Filter NOR.
Tape Length T30
Date/Time
Sub Menu
Title
1s
Animation
Give stationary scenes or objects an illusion of
movement. This function allows you to shoot a series of
pictures, each slightly different, of the same object for a
brief period of time.
ENGAGE RECORD–STANDBY
MODE
1
Make sure the lens cover is open, then set the power
switch to “CAMERA”.
SET RECORDING SPEED
2
Set SP/EP to SP (੬ pg. 13).
SET RECORDING TIME
3
Press REC TIME on the remote control. Four
choices are available, and they appear in the
following order (each time REC TIME is pressed):
1/4S (one-fourth of a second), 1/2S (one-half of a
second), 1S (one full second) and 5S (five seconds).
Pressing the button again will cancel the mode.
•You can also set the recording time in the Sub
Menu screen (੬ pg. 30). Press “–” to move the
highlight bar down to “Rec Time”, press NEAR,
and press + or – to cycle through the choices.
Then press MENU.
START RECORDING
4
Press RECORDING START/STOP after focusing on
the subject. The recording stops automatically after
the selected period of time.
ASSEMBLE SERIES OF PICTURES
5
Repeat steps 3 and 4 for the desired number of
pictures.
CHECK YOUR WORK
6
Play back the series of pictures to see if the
results were satisfactory.
RELEASE ANIMATION MODE
7
Press REC TIME until “ ” disappears from the LCD
monitor or the viewfinder, or set “Rec Time” in the
Sub Menu screen to “OFF”.
NOTES:
●
For best results, make sure the camcorder is secured
when shooting in Animation or Time-Lapse mode.
●
Fade-in/out cannot be performed during
Animation or Time-Lapse shooting.
●
Before performing other operations following Anima-
tion or Time-Lapse recording, make sure the Animation
or Time-Lapse mode is deactivated.
Main Menu Screen
Sub Menu Screen
Tally lamp
START/STOP
REC TIME
RM-V705U
(provided)
FAR
+
NEAR
–MENU
LCD monitor or viewfinder
Recording
Time Indicator