JVC GR-D290 Digital Camera User Manual


 
EN 23
VIDEO PLAYBACK
MasterPage: Start_Right
VIDEO RECORDING & PLAYBACK
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(pg. 24)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5 m (16 ft).
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
Pauses the tape (pg. 24)
Up Button (pg. 24)
C SLOW Rewind Button (pg. 24)
D REW Button
Rewind/Reverse Shuttle Search on a tape
(pg. 21)
Displays previous file in a memory card
(pg. 26)
Left Button (pg. 24)
E INSERT Button (pg. 46)
F SHIFT Button (pg. 24)
G DISPLAY Button (pg. 22, 43)
H SLOW Forward Button (pg. 24)
I PLAY Button
Starts Playback of a tape (pg. 20)
Starts Auto Playback of images in a memory
card (pg. 27)
J FF Button
Forward/Forward Shuttle Search on a tape
(pg. 21)
Displays next file in a memory card (pg. 26)
Right Button (pg. 24)
K A. DUB Button (pg. 46)
L STOP Button
Stops the tape (pg. 20)
Stops Auto Playback (pg. 27)
Down Button (pg. 24)
M EFFECT Button (pg. 24)
N EFFECT ON/OFF Button (pg. 24)
The following buttons are available when the
camcorder’s Power Switch is set to “A” or “M”.
o Zoom (T/W) Buttons
Zoom in/out (pg. 19, 24)
(Also available with the Power Switch set to
“PLAY”)
p START/STOP Button
Functions the same as the Recording Start/
Stop Button on the camcorder.
q S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
Playback Using The Remote
Control (GR-D290 only)
1
1
2
3
Lock tab
Remote sensor
GR-D290_270US.book Page 23 Tuesday, November 30, 2004 9:53 AM