Filter
Top Products
Master Page: Right
—15—
Still images
Use an application that can handle the
JPEG file format. To view a still image,
either double-click the still image file
(extension “.jpg”), or drag and drop the file
on the application icon.
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
1 Drop the memory card
icon on the desktop
into the [Trash] icon.
● If the confirmation
message appears, click
[OK].
2 Confirm that
“” is not
currently displayed on
the LCD monitor of the
camcorder.
● If “ ” is currently displayed,
wait until it disappears before
proceeding.
3 Disconnect the USB cable.
4 Set the camcorder’s Power
Switch to “OFF”.
The camcorder turns off.
This manual only refers to software
installation and PC connection. For more
details of the software, refer to its user’s
guide/help/Readme.
Ⅲ PowerProducer
1 Click [Start], go to [All
Programs] or [Programs] –
[CyberLink PowerProducer],
and then click User’s Guide/
Help/Readme depending on
your preference.
Ⅲ Digital Photo Navigator
● The instruction manual is included on the
CD-ROM in PDF format. Right-click the
CD-ROM icon in [My Computer], then
click [Open]. Double-click the [Docs]
folder. Open the “Start.pdf” file and click
the button of the desired language. Note
that Adobe
®
Acrobat
®
Reader
TM
or
Adobe
®
Reader
®
must be installed to read
PDF files.
● Adobe
®
Reader
®
can be loaded from
Adobe’s web site: http://
www.adobe.com/
Playing Back Files on the PC
(Macintosh)
Disconnecting the USB cable
(Macintosh)
User’s Guide/Help/Readme
INFORMATION
The supplied PowerProducer is a version
with limited functionality. The User’s
Guide and Help files are written for the
commercial version available in stores.
For information about the differences with
the commercial version, see the Readme
file.
M5D2NTSC_InstaGuide.fm Page 15 Thursday, November 18, 2004 11:31 AM