Filter
Top Products
—4—
Master Page: Left
Ⅲ Windows
®
The following requirements must be
satisfied to connect a camcorder to a PC
and to use Digital Photo Navigator.
OS: Windows
®
98 Second Edition (98SE)
(pre-installed), Windows
®
Millennium
Edition (Me) (pre-installed), Windows
®
2000
Professional (2000) (pre-installed),
Windows
®
XP Home Edition (XP) (pre-
installed), or Windows
®
XP Professional
(XP) (pre-installed)
CPU: Intel MMX
TM
Pentium
®
, at least
200 MHz
RAM: At least 64 MB
Free hard disk space: At least 10 MB for
installation, at least 500 MB recommended
Connector: USB connector
Display: Must be capable of displaying
800 x 600 dots with 16-bit color
Miscellaneous: Internet Explorer 5.5 or
later
For PowerProducer 2 Gold VCD
In addition to the requirements above, the
following requirements must be satisfied to
use PowerProducer 2 Gold VCD.
OS: The same as requirements above.
CPU: Intel Pentium
®
II, at least 450 MHz,
Intel Pentium
®
III, at least 800 MHz
recommended
RAM: At least 128 MB, at least 256 MB
recommended
Free hard disk space: At least 100 MB for
installation, at least 1 GB for creating VCD
Connector: IEEE1394 (i.LINK) connector.
Miscellaneous: DirectX 9.0 or later
(DirectX 9.0 is installed automatically),
Internet Explorer 5.5 or later
Supported media: CD-R/RW
Display: Must be capable of displaying
1024 x 600 dots with 16-bit color
For more details, refer to CyberLink web
site: http://www.gocyberlink.com/
english/products/powerproducer/
2_gold/comp_dvd_drives.jsp
Ⅲ Macintosh
The following requirements must be
satisfied to connect a camcorder to a PC.
Hardware: iMac, iBook, Power Mac G4 or
G5, PowerBook G3 or G4, eMac equipped
with a USB connector
OS: Mac OS 9.0.4 to 9.2.2, Mac OS X
(10.1.5, 10.2.1 to 10.2.8, 10.3.1 to 10.3.5)
RAM: At least 64 MB (Mac OS 9), At least
128 MB (Mac OS X)
● The system requirements information
above is not a guarantee that the
provided software will work on all
personal computers meeting those
requirements.
● If your PC does not meet the system
requirements above, you can use the
optional USB reader/writer CU-VUSD70,
the PC card adapter CU-VPSD60 or the
floppy disk adapter CU-VFSD50 to load
the files in the memory card to the hard
disk on your PC.
(Refer to “JVC Accessories” on our world
web site at: http://www.jvc-victor.co.jp/
english/accessory/)
● Microsoft
®
and Windows
®
are either
registered trademarks or trademarks of
Microsoft Corporation in the United
States and/or other countries.
● Macintosh is a registered trademark of
Apple Computer, Inc.
● Other product and company names
included in this instruction manual are
trademarks and/or registered trademarks
of their respective holders.
System Requirements
M5D2NTSC_InstaGuide.fm Page 4 Wednesday, November 24, 2004 9:22 AM