Filter
Top Products
Master Page: Right
—11—
Still images
Use an application that can handle the
JPEG file format. To view a still image,
double-click the still image file (extension
“.jpg”).
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
When using Windows
®
98SE
1 Confirm that “ ” is not
currently displayed on the LCD
monitor of the camcorder.
● If “ ” is currently displayed,
wait until it disappears before
proceeding.
2 Double-click the [My Computer]
icon on the desktop.
If the camcorder is connected to the
PC correctly, the [Removable Disk]
icon appears.
3 Right-click the
[Removable
Disk] icon in the
[My Computer]
window.
A menu appears.
4 Click [Eject] in the menu.
The [Removable Disk] icon
disappears.
● If the icon does not disappear, wait
for a while, and then proceed to
step 5.
5 Disconnect the USB cable.
● If any message appears, click [OK].
6 Set the camcorder’s Power
Switch to “OFF”.
The camcorder turns off.
When using Windows
®
2000/Me/XP
1 Confirm that “ ” is not
currently displayed on the LCD
monitor of the camcorder.
● If “ ” is currently displayed,
wait until it disappears before
proceeding.
2 Double-
click the
[Safely
Remove Hardware] or [Unplug
or Eject Hardware] icon in the
status bar.
The [Safely Remove Hardware] or
[Unplug or Eject Hardware] dialog box
appears.
Windows
®
XP: If not, wait a while then
go to step 5.
Playing Back Files on the PC
(Windows
®
)
Disconnecting the USB Cable
(Windows
®
)
CONTINUED ON NEXT PAGE
M5D2NTSC_InstaGuide.fm Page 11 Thursday, November 18, 2004 11:31 AM