Filter
Top Products
GETTING STARTED
EN 5
MasterPage: Start_Right
GETTING STARTED
a AC Adapter AP-V14E or AP-V15E
b Power Cord
c Battery Pack BN-V408U-B
d Audio/Video Cable (ø3.5 mini-plug to RCA plug)
e Core Filter (for USB Cable and optional S-Video
Cable. ੬ pg. 6 for attachment)
f Shoulder Strap (See the right column for attachment)
g CD-ROM
h Memory Card 8 MB (Already inserted in the
camcorder)
i Remote Control Unit RM-V718U
j Lithium Battery CR2025* (for remote control unit)
k USB Cable
l Lens Cap (See the right column for attachment)
m Cable Adapter
* A lithium battery is pre-installed in the Remote Control Unit
at time of shipment (with insulation sheet). To use the
Remote Control Unit, remove the insulation sheet.
NOTES:
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one or
more core filter. If a cable has only one core filter, the end
that is closest to the filter should be connected to the
camcorder.
● Make sure to use the provided cables for connections. Do
not use any other cables.
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to
the camcorder as shown
in the illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap
is flush to the camcorder.
How To Attach The Shoulder Strap
Follow the illustration.
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap guide and
the buckle.
● To adjust the length of the strap, loosen and then tighten
the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Provided Accessories
9
0
2
3
4
6
we
5
T
W
or
Push.
Place here during
shooting.
1
2
3
Strap guide
Buckle
Eyelet
GR-D63EK.book Page 5 Tuesday, December 16, 2003 7:44 PM