Filter
Top Products
EN
53
USING THE REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.
For GR-DVL725 Owners: If you want to perform
Random Assemble Editing (
੬ pgs. 58 – 62), use the
optional RM-V700U remote control.
Installing The Batteries
(RM-V717U or RM-V715U, provided)
The remote control uses two “AAA (R03)” size
batteries. See “General Battery Precautions”
(
੬ pg. 75).
1Open the battery compartment cover as illustrated.
2 Insert two ”AAA (R03)” size batteries in the
correct direction.
3 Replace the battery compartment cover.
Installing The Battery
(RM-V700U, optional)
The remote control uses one lithium battery
(CR2025).
1There are 2 ways to pull the battery holder out of
the RM-V700U.
: Pull out the battery holder while sliding the lock
hole.
: Pinch the release tab and pull out the battery
holder.
2 Insert the battery in the holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
• Read the caution concerning lithium batteries in the
RM-V700U instruction manual.
When using the remote control, be sure to point it
at the remote sensor. The transmitted beam’s
approximate effective distance for indoor use is
5m (16ft).
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.
A
B
11
1
1
1
2
2
3
3
+
–
+
–
+
+
–
–
1
11
2
22
3
33
Lock hole
Knob
RM-V717U
Tab
RM-V715U
Remote sensor