Filter
Top Products
10 EN
1
INSERT CHARGED BATTERY
To insert a battery pack, slide the battery lock
switch to the release position and insert the
battery
end first. To prevent the battery pack
from falling out, be sure to slide the battery lock
switch to the lock position.
2
ATTACH TO CAMCORDER
Insert the Battery Holder’s nub into the mounting
socket on the bottom of the camcorder and slide
the camcorder lock lever to the lock position.
•To detach the camcorder, press the release
button on the lock lever and slide the lock lever
to the release position. Then slide the battery
lock switch to the release position.
NOTES:
●
When the battery remaining power indicator appears
as
, that means the battery power is close to nil.
When the battery power is exhausted, power turns
off automatically.
●
Each time you start shooting, the camcorder chooses
the battery pack that has more remaining power, and
uses that as the power supply. That means both
battery packs will be exhausted at roughly the same
time.
GETTING STARTED
(Cont.)
1
CONNECT DC CORD TO CAMCORDER
Insert the coupler of the provided DC cord into
the camcorder.
2
CONNECT DC CORD TO AC
CHARGER STATION
Connect the DC cord to the AC Charger Station’s
DC OUT jack.
Indoor Use
When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.
Power lamp
When power is
supplied, the
power lamp lights.
AC Charger Station
AA-V60EK or AA-V60EA
Slide down the
open switch.
Camcorder
connector
To AC outlet
Power cord
DC cord
Nub
Camcorder lock lever
(with release button)
Using The Battery Holder
For extended use, prepare the Battery Holder (CU-V615U), which can be loaded with one battery pack. This
Battery Holder can be used together with the battery installed in the camcorder.
Battery lock switch
To DC
OUT
jack
Battery
Mark
3
SUPPLY POWER TO AC CHARGER
STATION
Plug the AC Charger Station’s power cord into an
AC outlet.
NOTE:
Since the AC Charger Station processes electricity
internally, it becomes warm during use. Be sure to use
it only in well-ventilated areas.
Coupler
Remove.
Core filter