Filter
Top Products
EN 63
TW
Random Assemble Editing
Using the remote control, you can use P.AE/Effects and make an original edited tape.
1
MAKE CONNECTIONS
Make sure that the playback picture and sound
are available on the connected TV (੬ pg. 56,
57).
•Connections should be made while the power
is off. Making connections with the power on
can lead to electrical shock or malfunctions.
2
START SOURCE PLAYBACK
First turn the Power Dial to “PLAY” while
pressing down the lock button located on the
dial. Press PLAY and then press R.A. EDIT ON/
OFF on the remote control. Make sure to point
the remote control at the camcorder’s remote
sensor.
•The Random Assemble Editing Menu appears
on the TV screen or the LCD monitor.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•You can’t use a Picture Wipe/Dissolve at the
beginning of Program 1.
Source tape
(Camcorder)
New tape
(VCR)
NOTES:
●
When using a JVC VCR with a remote pause
terminal, connect the EDIT connector on the AC
Charger Station to the VCR’s remote pause terminal
using an editing cable.
●
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the AC
Charger Station’s EDIT connector to the remote
control’s remote pause connector using an editing
cable.
●
For customers in the U.K.;
Set the VIDEO OUT
select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video cable.
●
Before Random Assemble Editing, make sure the
indications don’t appear on the TV monitor. If they
appear during Random Assemble Editing, they will
be recorded onto the new tape. To clear the Playback
Sound Mode Display, press DISPLAY on the remote
control. Select “DISPLAY” and “TIME CODE” from
the Playback Menu (
੬
pg. 52) to show or hide the
Date/Time and the Time Code on the recording. To
show or hide all indications except for the Random
Assemble Editing Menu, press IND. ON/OFF on the
camcorder for longer than 1 second. When Random
Assemble Editing starts, its indications disappear and
are not recorded on the new tape.
VCR
(Recording deck)
To remote
pause
connecter
To EDIT connector
Core
filter
Remote sensor
To S-VIDEO OUT connector
Editing cable
(provided)
PLAY
R.A. EDIT
ON/OFF
VIDEO/
AUDIO cable
(provided)
S-VIDEO cable
(provided)
White to AUDIO L
Red to AUDIO R
Yellow to VIDEO
CONTINUED ON NEXT PAGE
Core
filter
Core
filter
White to AUDIO L
Red to AUDIO R
Yellow to VIDEO
DISPLAY
FADE/WIPE
Cable adapter (provided
only with U.K. models)
If your VCR has the
21-pin AV input connector
(SCART), use the provided
cable adapter.
VIDEO OUT
select switch
(Y/C or CVBS)