JVC GR-DVX88 Camcorder User Manual


 
70 EN
DISPLAY
MAKE CONNECTIONS
Also refer to pg. 22 and 23.
1
A JVC VCR equipped with a Remote PAUSE
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
controls PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to VIDEO (GR-DVX88/DVX77
only), then set the Power Switch to while
pressing down the Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCRs instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they
do, they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
Date/Time
.... set DATE/TIME to AUTO, ON or OFF in the
Menu Screen ( pg. 42, 43).
Time Code
.... set TIME CODE to ON or OFF in the Menu
Screen (
pg. 42, 43).
Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set ON SCREEN to LCD or LCD/TV in the
Menu Screen ( pg. 42, 43). Or, press DISPLAY on
the remote control.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
To Remote
PAUSE or
R.A.EDIT
VCR
TV
To PAUSE IN
Editing cable
(provided)
S-Video
cable
(optional)
Audio/Video
cable (provided)
To
JLIP***
or
EDIT***
To S-VIDEO
For GR-DVX44 Owners:
ATTENTION FOR EDITING CABLE
Make sure you connect the plug which has
3 rings around the pin to the camcorder.
USING THE REMOTE CONTROL UNIT
(cont.)
To AV OUT
Connector
cover**
To AUDIO,
VIDEO*
and
-IN
connectors
Y/C/CVBS
video out
select switch
If your VCR has the
SCART connector,
use the provided
cable adapter.
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
***EDIT:GR-DVX88/DVX77
JLIP: GR-DVX44