Filter
Top Products
E-65
MANUAL ADJUSTMENTS Using ND Filter
When the shooting conditions are too bright, the ND-filter can be used to reduce the brightness to an
appropriate level. The built-in ND-filter can adjust the brightness to about 1/32 of the original.
ND FILTER switch
● Please check the position of the
ND FILTER switch before
recording.
● Do not switch the position of the
ND FILTER switch during
recording. The image will be
disturbed.
ND
A
Filter indication
Ⅲ Engage the recording-standby mode.
1.
Set the ND FILTER switch to “ON”.
● The built-in ND-filter is engaged, and ND filter indication
appears on the LCD screen and the viewfinder screen.
Ⅲ The white balance will not be adjusted correctly when using
the ND-filter and shooting in the auto white balance mode.
Adjust the white balance in the manual white balance mode when
using the ND-filter and shooting. (
☞
See page 66.)
Operation