Filter
Top Products
E-95
Item Set Value Contents
TIME/DATE DISP+REC Selects whether the date and time should be shown on the LCD
●DISPLAY screen or the viewfinder screen, and whether the indications
OFF should be recorded on the tape.
DISP+REC : Displayed on the LCD screen or the viewfinder
screen and recorded on the tape.
DISPLAY : Only displayed on the LCD screen or the
viewfinder screen.
OFF : Neither displayed nor recorded.
The conditions for recording the date and time are selected with
the DATE REC item on the SYSTEM [2/2] menu screen.
DISP STYLE ●DATE+TIME Selects the style of the date and time indication and whether this
TIME should be shown on the LCD screen and the viewfinder screen.
DATE DATE+TIME: Date and time are shown.
TIME : Time is shown.
DATE :Date is shown.
AUDIO LEVEL ● ON Selects whether the audio level meters should be shown on the
OFF LCD screen and the viewfinder screen.
ON : Displayed
OFF: Not displayed
CENTER MARK ●OFF Sets whether or not a centre mark is displayed.
ON ON : Displayed
OFF : Not displayed
OUTPUT CHAR. OFF Selects whether on-screen-indications are displayed on a
●MIX monitor connected to the VIDEO OUT or Y/C OUT connector.
OFF : On-screen-indications are not displayed
MIX : On-screen-indications are displayed
PAGE BACK The DISPLAY [1/2] menu screen returns when the SELECT dial
is pressed.
DISPLAY Menu Screen (cont’d)
Memo:
When the MODE switch is set to VTR (VTR playback /DV
mode), this item is not displayed.
When the mode switch is set
to VTR, DISP + REC changes
into OFF (D+R).
In this case, TIME/DATE is
neither displayed nor
recorded.
Memo:
When DISP+REC is set, the ASPECT item on the SYSTEM [2/
2] menu screen is fixed at 4:3.