Filter
Top Products
10
Introduction
Side Control Panel
A
[VF BRIGHT] Viewfinder Luminance Adjustment Knob
(
A
Page 28)
B
[VF PEAKING] Contour Adjustment Knob (
A
Page 28)
Memo :
●
This knob does not function when Focus Assist is activated.
(
A
Page 35)
C
[FOCUS ASSIST] Focus Assist Button
Press this button during shooting to display the focused area
in either blue, red, or green. This enables easy and accurate
focusing.(A Page 35)
D
[USER1], [USER2], [USER3] User Buttons
(
A
Page 74)
Use these buttons to switch shooting conditions according to
the object. The functions change as below according to the
operation mode (A Page 7).
Memo :
●
Set the functions of the [USER1,USER2,USER3] buttons in
the menu. (
A
Page 74)
●
When the menu screen is displayed, these buttons function
as the menu operation buttons.
(
A
Page 66 [Operation Buttons])
E
[MENU] Menu Button (
A
Page 66)
F
[ND FILTER] ND Filter Switch (
A
Page 43)
G
[STATUS] Status Screen Display Button
Press the [STATUS] button to display the Status Screen on
the viewfinder and LCD monitor during normal screen
display (when the menu screen is not displayed).
( A Page 16 [Status Screen])
H
[GAIN] Sensitivity Selection Switch (
A
Page 37)
I
[WHT.BAL.] White Balance Selection Switch
(
A
Page 40)
You can select one of the three white balance types.
J
[POWER] Power ON/OFF Switch
Turns ON/OFF the power.
When the power is OFF, APOFFB appears on the LCD
monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
K
[REC] REC Trigger Button (Recording Start/Stop)
Starts/stops recording.
The [REC] trigger button (A Page 9) Z on top and the [REC]
trigger button (A Page 14) of the lens are interlocked with
this button.
Memo :
●
When [1394 Rec Trigger] in the [Others] menu is set to
A
Split
B
, this button becomes the recording start/stop button
of the external equipment. (
A
Page 88)
(
A
Page 113 [Backup Recording])
L
[CH1/CH2 AUDIO LEVEL]/[AUTO] CH-1/CH-2
Recording Level Adjustment Knob/Auto Indicator
(
A
Page 44)
M
[CANCEL] Cancel Button
Cancels various settings and stops playback.
N
Cross-Shaped Button (
JKHI
)/Set Button (
R
)
The function changes according to the operation status of
the camera recorder.
Ⅵ During menu operation (all modes) (A Page 66)
Center Set button (
R
) : Confirms menu items and setting
values
Cross-shaped button (
JK
) : Selects menu items and setting values
Ⅵ During Camera mode
Shutter operation :
Center Set button (
R
) : Shutter ON/OFF
Cross-shaped button (
JK
) : Switches shutter speed when shutter
is ON
AE level operation: Cross-shaped button (HI)
Names of Parts (continued)
During Camera Mode During Media Mode
[USER1]
Button
●
Activates the function assigned to
[USER1] in the menu.
●
Loads the [TC Preset] screen
when pressed together with the
[MENU] button. (
A
Page 48)
Adds/deletes OK
mark.
(A Page 64)
[USER2]
Button
●
Activates the function assigned to
[USER2] in the menu.
●
Resets settings on the [TC
Preset]/[UB Preset] screen when
pressed. (
A
Page 48, 49 )
Deletes clip.
(A Page 62)
[USER3]
Button
●
Activates the function assigned to
[USER3] in the menu.
^
A
B
D
E
F
G
I
J
L
M
N
O
P
K
C
H