Filter
Top Products
83
Shooting Assist... Item
* Default values are indicated in bold characters.
Item Setting Values Function
Focus Assist
ACCU-Focus
Normal
For specifying the operation when the [FOCUS ASSIST] button on the camera recorder is
pressed. (A Page 35)
ACCU-Focus : Enables the Focus Assist and ACCU-Focus (forced focus) functions. The
depth of field of the object becomes shallower to enable easier focusing. The
ACCU-Focus function switches automatically to AOffB after about 10
seconds.
Normal : Enables only the Focus Assist function. The focused area is displayed in
color to enable easier focusing. Display color can be specified with [Color].
Color Blue
Green
Red
For setting the display color of the focused area when Focus Assist is activated.
Blue : Displays the focused area in blue.
Green : Displays the focused area in green.
Red : Displays the focused area in red.
Level
High
Middle
Low
For setting the display range of the focused area when Focus Assist is activated.
High : Sets the display range wider than Middle.
Middle : Sets the display range to standard.
Low : Sets the display range narrower than Middle.
Zebra
2Patterns
1Pattern
For selecting the number of zebra patterns to be displayed.
2Patterns: Displays 2 types of zebra patterns (Zebra1 and Zebra2).
1Pattern : Displays 1 type of zebra pattern (Zebra1).
Top1
Over,
100% to 85%,
80%,
75% to 5%
(In 5 % increments)
For setting the maximum luminance level for the AZebra1B display.
Memo :
● The Bottom value is automatically adjusted during setting of the Top value to ensure that a
Top > Bottom relationship is always maintained.
Bottom1
100% to 75%,
70%,
65% to 0%
(In 5 % increments)
For setting the minimum luminance level for the AZebra1B display.
Memo :
● The Bottom value is automatically adjusted during setting of the Top value to ensure that a
Top > Bottom relationship is always maintained.
Top2
Over,
100% to 5%
(In 5 % increments)
For setting the maximum luminance level for the AZebra2B display.
Memo :
● This item cannot be selected when [Zebra] is set to A1PatternB.
● The Bottom value is automatically adjusted during setting of the Top value to ensure that a
Top > Bottom relationship is always maintained.
Bottom2
100% to 85%,
80%,
75% to 0%
(In 5 % increments)
For setting the minimum luminance level for the AZebra2B display.
Memo :
● This item cannot be selected when [Zebra] is set to A1PatternB.
● The Bottom value is automatically adjusted during setting of the Top value to ensure that a
Top > Bottom relationship is always maintained.
Peaking
Frequency
High
Middle
Low
For setting the frequency range for applying contour enhancement using the [VF PEAKING]
adjustment knob or [LCD PEAKING +/-] button.
High : Emphasizes the high frequency range.
Middle : Emphasizes the intermediate frequency range.
Low : Emphasizes the low frequency range.