Filter
Top Products
Adjusting Parallax During Playback
When playing back 3D images of scenes where there are
multiple objects arrayed in a line from near to far, or objects
that are extremely close to the camera, you can change the
way they appear to the eye.
0
Parallax can be adjusted when 3D or LR MIX images are
displayed on the unit’s LCD monitor.
1
Tap k.
.
2
Tap “MANUAL”.
.
MANUAL
AUTO
0
The parallax adjustment screen appears.
0
To set parallax adjustment to auto (default), tap
“AUTO”.
3
Adjust the parallax.
.
SET
0
To increase the amount of correction, tap “+”. Doing
so increases the value of the parallax display.
0
To reduce the amount of correction, tap “-”. Doing so
decreases the value of the parallax display.
4
Tap “SET” to confirm.
.
SET
Caution :
0
Too much parallax may cause the 3D effect to be lost.
0
If you see double images even after parallax adjustment,
set the display on the TV to 2D immediately. In addition,
set the LCD monitor to 2D display accordingly.
Memo :
0
While this unit is equipped with the function to adjust
parallax automatically, it may not work properly for the
following subjects.
- Subjects beyond the recommended shooting distance
(especially subjects that are extremely close to the
camera)
- Numerous subjects of the similar shape arrayed in a line,
such as the windows of a building
- Straight subjects such as electric wires
In these cases, adjust the parallax manually.
0
When the power of this unit is turned off or the mode is
switched to recording after parallax is manually adjusted,
the “PARALLAX ADJUSTMENT” setting returns to
“AUTO”.
Playback
62