JVC GZ-MG20AA Camcorder User Manual


 
–13–
MasterPage: Body
NOTES:
If PowerDirector/PowerProducer/PowerDVD have
already been installed on the PC, uninstall them
before installing the provided software:
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 2 Gold NE,
PowerDVD 5 NE).
If you perform installation of a software that is
already installed, uninstallation will start. In this
case, perform the installation again after
uninstallation is finished.
Windows Messenger has to been closed during
CyberLink DVD Solution installation. If it is running
during installation, [Information] screen appears.
To close Windows Messenger:
1) While holding [Ctrl + Alt] key, click [Delete]
key so that [Task Manager] appears.
2) Click [Processes] tab.
3) Select [msmsgs.exe].
4) Click [End process].
Connecting the USB cable
Connect the USB cable to copy still images and
video files in a recording medium to the PC.
1 To assure safety, make sure all units are
turned off before making any connections.
2 Use the USB cable to connect the camera
to the PC.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
Connect the camera directly to the PC, not through
the hub.
Do not use an extension USB cable.
Connections (Windows
®
)
Camera
To USB connector
PC
To USB connector
USB cable
M5E3_InstallGuide.book Page 13 Tuesday, August 9, 2005 3:18 PM