Filter
Top Products
–28–
MasterPage: Body
11Enter the Macintosh Administrator name
and password in [Name] and [Password]
respectively, and click [OK].
Finish Up screen appears.
● If you are not the owner, this screen will not be
appeared.
12Click [Close] after you will confirm the
message that tells you the installation has
been completed.
13Click [Close] when the installation is
finished and eject the CD-ROM.
Connect the USB cable to copy still images and
video files in a recording medium to the PC.
1 To assure safety, make sure all units are
turned off before making any connections.
2 Use the USB cable to connect the camera
to the PC.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
● When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
● Connect the camera directly to the PC, not through
the hub.
● Do not use an extension USB cable.
Connections (Macintosh)
Camera
To USB connector
PC
To USB connector
USB cable
M5E3_InstallGuide.book Page 28 Tuesday, August 9, 2005 3:18 PM