Filter
Top Products
Inserting an SD card
When a commercially available SD card is inserted, recordings can still be made to
the card without stopping when the remaining recording time on the built-in memory
runs out.
* To record to the card, it is necessary to perform media settings. ( P.12)
When no card is available, set media settings to “BUILT-IN MEMORY” for
recording.
.
1
Close the LCD monitor.
Label
3
Insert an SD card.
2
Open the cover.
*Turn off the power of this unit
before inserting or removing a card.
(Base)
■
To remove the card
Push the card inward once, then pull it out straight.
.
(Base)
NOTE
Operations are confirmed on the following SD cards.
Manufacturer Panasonic, TOSHIBA, SanDisk, ATP
Video
Class 4 or higher compatible SDHC card (4 GB to 32 GB)
(Class 6 is recommended when recording in “UXP”
quality.)
Still Image
SD card (256 MB to 2 GB), SDHC card (4 GB to 32 GB)
●
Using cards other than those specified above may result in recording failure
or data loss.
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
11
Getting StartedRecordingPlaybackCopying
Further
Information