Filter
Top Products
19
ENGLISH
When connection is completed
On the PC’s desktop, [EVERIO_HDD]/[EVERIO_SD]
icon which represents the recording medium in the
camera appears. (੬ pg 23, Folder Structure and
Extensions)
NOTE
When the USB cable is connected, turning on or off the camera causes malfunctions of
the PC.
Connect the camera directly to the PC, not through the hub.
Do not use an extension USB cable.
Saving the wrong kinds of fi les in a recording medium or deleting fi les or folders from
a recording medium can cause problems with the operation of the camera. When it is
necessary to delete a fi le from a recording medium, delete it through the camera. Also,
do not move or rename folders and fi les in the medium on PC.
Never disconnect the USB cable while the access/charge lamp on the camera lights or
blinks.
When you have fi nished operation
Always follow the procedures below when disconnecting the camera, or turning off the
camera/computer power.
Failing to do so may cause damage to the camera and computer.
A
Drag & drop the recording medium icon on the desktop into the [Trash] icon.
If the confi rmation message appears, click [OK].
B
Confi rm that the access/charge lamp on the camera does not light or blink.
If the access/charge lamp lights or blinks, wait until it is turned off before proceeding.
C
Disconnect the USB cable.
D
Turn off the camera and PC.