Filter
Top Products
EN 23
While recording
● You can zoom up to 8x by using the optical zoom.
● Digital zoom (੬ pg. 20) is not available.
You can record still images continuously.
Preparation:
●Set the power switch to .
●Set the MODE switch to .
Set the [CONTINUOUS SHOOTING] to
[ON] or [BRACKETING]. (੬ pg. 59)
[ON]
()
Keeping the REC/SNAP button pressed in
step 3 (੬ pg. 22) provides an effect similar to
serial photography. (Interval between still
images: approx. 0.5 seconds)
● Continuous shooting may not work well
depending on the recording medium.
● The continuous shooting speed will drop if this
function is used repeatedly.
[BRACKETING] ()
By pressing the REC/SNAP button in step 3
(੬ pg. 22), three still images are recorded. In
addition to an image with the exposure set by
the camera, two other images are recorded with
exposure values shifted to the +0.3 EV and
–0.3 EV sides. You can select the image that
has a suitable exposure after shooting.
You can use the flash for still image recording.
The flash setting can be changed as required.
Preparation:
●Set the power switch to .
●Set the MODE switch to .
Each time you press the button, setting
changes.
The file most recently recorded will be deleted.
After the recording is finished
Zooming
Continuous Shooting
Zoom out
Zoom in
T: Telephoto
W: Wide angle
4
0
FINE
The or
indicator appears.
Flash
The flash fires automatically.
The flash fires automatically but
reduces the red-eye phenomenon
of the subject's eyes.
The flash fires regardless of the
shooting condition.
The flash fires. The shutter
speed becomes slower, so the
background can also be
brightened.
No display
Disables this function.
Deleting a File
1
2
Select [EXECUTE].
NOTE:
If the recording mode (video or still image) is
switched, or the power is turned off and on again
after recording, you cannot delete the file.
6
0
FINE
DELETE?
CANCEL
EXECUTE
Select
Set
RECORDING
M6E8US.book Page 23 Wednesday, April 26, 2006 2:58 PM