JVC GZ-MG70U Camcorder User Manual


 
26 EN
VIDEO RECORDING & PLAYBACK
MasterPage: Body_Left
A White to AUDIO L IN*
B Red to AUDIO R IN*
C
Yellow to VIDEO IN (Connect when your TV/VCR/
DVD recorder has only A/V input connectors.)
D Black to S-VIDEO IN (Connect when your TV/
VCR/
DVD recorder
has S-VIDEO IN and A/V
input connectors. In this case, it is not
necessary to connect the yellow video cable.)
* Not required for watching still images only.
NOTES:
The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Center described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camera. The core filter
reduces interference.
It is recommended to use the AC adapter as
the power supply instead of the battery pack.
(pg. 16)
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camera is turned on.
To connect the camera to a PC, refer to the
software installation and USB connection guide.
Playback on a TV
1 Make sure all units are turned off.
2 Connect the camera to a TV, VCR or DVD
recorder as shown in the illustration.
If using a VCR or DVD recorder, go to step 3.
If not, go to step 4.
3 Connect the VCR/DVD recorder output to the
TV input, referring to your VCR/DVD recorder’s
instruction manual.
4 Turn on the camera, the VCR/DVD recorder
and the TV.
5 Set the VCR/DVD recorder to its AUX input
mode, and set the TV to its VIDEO mode.
6 Start playback on the camera. (pg. 24)
To choose whether or not the following
displays appear on the connected TV
Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF].
(pg. 48, 49)
Counter
Set [SCENE COUNTER] to [ON] or [OFF].
(pg. 48, 49)
(Pressing INFO/ button also turns on/off the
displays.)
Dubbing to a VCR (or DVD Recorder)
The following explains how to dub to a VCR.
When dubbing to a DVD recorder, refer to its
instruction manual.
1 Perform steps 1 to 6 above.
2 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
3 To stop dubbing, stop recording on the VCR,
then stop playback on the camera.
Connecting to a TV, VCR or
DVD Recorder
TV
VCR/DVD Recorder
Open the
cover.
To S connector
AV Cable
(provided)
S Cable
(optional)
To AV connector
M5E6US.book Page 26 Tuesday, September 27, 2005 5:42 PM