Filter
Top Products
8 EN
GETTING STARTED
MasterPage: Body_Left
Attaching the Shoulder Strap
Follow the illustration.
1 Open the velcro strip.
2 Thread the strap through the eyelet.
3 Fold it back and thread it through the strap
guide and the buckle.
● To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
4 Slide the strap guide fully towards the eyelet.
5 Close the velcro strip.
Attaching the Lens Cap
To protect the lens,
attach the provided lens
cap to the camera as
shown in the illustration.
NOTE:
To confirm the lens cap is
on correctly, make sure the
cap is flush to the camera.
3
4
5
2
1
Strap Guide
Buckle
Eyelet
Place here during
recording.
M5E6US.book Page 8 Tuesday, September 27, 2005 5:42 PM