Filter
Top Products
36 EN
Master Page: Left
GR-DVP7-5EG_26-36.fm Page 36
You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Press MENU. The
Menu Screen appears.
5 Press + or – to select
“FORMAT”, and press
SET/SELECT. The
FORMAT screen
appears.
6 Press + or – to select “EXECUTE”, and press SET/
SELECT. The memory card is initialised.
● When initialisation is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND FILES” appears.
● To cancel initialisation, select “RETURN”.
Initialising A Memory Card
Power Switch
Lock Button
VIDEO/MEMORY Switch
MENU Button
SET/SELECT Button
+, – Button
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO. RESET
FORMAT
ORMATF
EXECUTE
DATA?EXISTING
ERASE ALL
RETURN
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialisation. If the memory card becomes
corrupted initialise it.
D.S.C. PLAYBACK (cont.)
GR-DVP7-5EG_02-08.book Page 36 Thursday, February 28, 2002 11:39 AM