JVC GR-DX25 Camcorder User Manual


 
EN
24
USING MENUS FOR DETAILED ADJUSTMENT
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on
the connected TV. Frame numbers are not displayed
during recording.
CLOCK ADJ.
Allows you to set the current date and time ( pg. 10).
For Playback Menu
The following procedure applies to all except Synchro
Comp ( pg. 32).
1 Set the Power Switch 8 to “ ” while pressing
down the Lock Button 0 located on the switch.
2 Press MENU 2. The Menu Screen appears.
3 Press + or 3 to select the desired function menu,
and press SELECT/SET 1.
4 Press + or 3 to select the desired function, and
press SELECT/SET 1 to display the Sub Menu.
5 Press + or 3 to select the desired parameter and
press SELECT/SET 1. Selection is complete.
6 Press + or 3 to select “ RETURN” and press
SELECT/SET 1 twice to close the Menu Screen.
VIDEO
SOUND MODE
........ pg. 25, “Playback Sound”.
12bit MODE
........ pg. 25, “Playback Sound”.
SYNCHRO
........ pg. 32, “For More
Accurate Editing”.
REC MODE
Allows you to set the tape recording mode ([SP] or
LP) depending on your preference ( pg. 10).
It is recommended you use “REC MODE” in the
VIDEO” Menu when using this camcorder as a
recorder during dubbing (GR-DX55/DX35 only, pg.
26, 27).
•“REC MODE” can be set when the Power Switch 8 is
set to “ ” or “ ” ( pg. 10, 21).
S/AV INPUT
A/V IN: Enables audio/video signal input from the
S/AV connector ( pg. 26).
S IN: Enables S-Video/audio signal input from the S/
AV connector ( pg. 26).
[OFF]: Enables audio/video signal output to a TV,
VCR, etc. via the S/AV connector ( pg. 15, 26).
•When “S/AV INPUT” is set to “A/V IN” or “S IN”,
camcorder playback cannot be viewed on the AV
output.
SYSTEM
Each setting is linked with “ SYSTEM”, which
appears when the Power Switch 8 is set to “
( pg. 23).
The parameters are the same as in the description on
pg. 23.
[ ] = Factory-preset
IVDE
O
MDOESOUND
MDOE
12
bit
ROSYNCH
ODEREC M
STEREO
SOUND
1
O.O
OFF
NPUT
S/
AV I
RETURN
MELODY
EEPB
RETURN
AM RESETC
LCD
RIORITYP
ON
EMO MODED
ON
EMOTER
ON
ALLYT
SYSTE
M
(GR-DX55/DX35 only)
01 DX55/45/35/25EK_EN 24-33 03.1.23, 1:43 PM24