JVC GR-DX25 Camcorder User Manual


 
EN
25
12
12:34:24
0
30.21
3:71
.
5
2
bit/SOUND
1
4
6
L
USING MENUS FOR DETAILED ADJUSTMENT
ON SCREEN setting:
For playback sound, tape
speed and tape running.
DATE/TIME setting:
For date/time.
Display
Minutes
Seconds
Frames*
* 25 frames = 1 second
TIME CODE setting:
For time code.
VIDEO DISPLAY
Settings made in the VIDEO DISPLAY Menu are
effective only for tape playback.
ON SCREEN
OFF: Camcorder's display (except the date, time and
time code) is not shown on LCD or connected TV.
[LCD]: Camcorder's display is shown only on LCD
and not on connected TV (except the date, time and
time code).
LCD/TV: Camcorder's display is shown on both LCD
and connected TV.
DATE/TIME , TIME CODE
Refer to CAMERA DISPLAY on page 23, 24.
The factory-preset of DATE/TIME in the VIDEO
DISPLAY Menu is OFF.
Playback Sound
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany
your playback picture. According to the menu access
explanation on pg. 24, select SOUND MODE or
12bit MODE from the Menu Screen and set it to the
desired parameter.
SOUND MODE
[STEREO ]: Sound is output on both L and R
channels in stereo.
SOUND L : Sound from the L channel is output.
SOUND R : Sound from the R channel is output.
12bit MODE
MIX: Original and dubbed sounds are combined and
output in stereo on both L and R channels.
[SOUND 1]: Original sound is output on both L and
R channels in stereo.
SOUND 2: Dubbed sound is output on both L and
R channels in stereo.
[ ] = Factory-preset
NOTES:
The camcorder cannot detect the sound mode in which
the recording was made during fast-forward or rewind.
During playback the sound mode is displayed in the upper
left corner.
The SOUND MODE setting is available for both
12-bit and 16-bit sound. (In previous models functions,
12-bit is called 32 kHz and 16-bit is called 48 kHz.)
EE
O
IVDE
O
DISPLAY
R
ENEON SC
TIDA METE/
CODTIM
LCD
OFF
FF
RETURN
01 DX55/45/35/25EK_EN 24-33 03.1.23, 1:43 PM25