Filter
Top Products
E32
@@@@@@
3. Settings and adjustments for recording (continued)
White shading adjustment
Even if the white balance is successfully achieved in the center of the screen, there may be
times when white balance cannot be achieved at the top and bottom of the screen, resulting in
the color of green and magenta becoming discolored. This is due to the characteristic of the lens
and the adjustment of this is called the white shading adjustment.
Perform the following after adjusting the white balance.
1.
Press the MODE button to enter the REC mode (REC
LED on), then press and hold the MENU button for at
least 2 seconds to display the REC MENU screen.
(If the button is pressed for less than 2 seconds, the
REC mode quick menu will appear. ੬ Page 38)
2.
Press the DOWN button, select 2. WHITE BALANCE
(the text will be displayed in purple when selected), then
press the SET button.
The WHITE BALANCE screen will appear.
3.
Press the UP/DOWN and SET buttons to set SHAD-
ING MODE in the WHITE BALANCE screen to ADJUST.
The set value will be displayed in purple, indicating that
it can be adjusted.
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
DOWN
SET
REC LED
MENU
REC--- MENU ---
1 : EXPOSURE . .
2:WHITE BALANCE. .
3:FREEZE. .
4 :PROCESS . .
5:SYSTEM SETTING. .
REC MENU screen