Filter
Top Products
12 EN
1
2
4
3
Shoulder Strap Attachment
1
ATTACH STRAP
Make sure the battery pack or DC cord is removed.
As shown in the illustration on left, thread the strap
through the low eyelet 1, then fold it back and
thread it through the buckle 2.
2
ADJUST LENGTH
Adjust as shown in the illustration on left 3.
3
ATTACH TO THE OTHER EYELET
Repeat step 1 to attach the other end of the strap to
the other eyelet 4, making sure the strap is not
twisted.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Tripod Mounting
1
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
GETTING STARTED
(cont.)
Buckle