Filter
Top Products
22
This unit is provided with a SETUP MENU that allows various settings to be performed on
the screen of a connected monitor using the switches on the camera body. The SETUP
MENU consists of separate layers divided according to function types as shown below.
The setup menus that can be set vary depending on whether the settings are done using the
operation buttons on the camera body or by transmitting commands from an external control
device, such as the JVC RM-P2580.
* Menu setting operation can only be conducted after the operation to display the SETUP
MENU has been performed (using the operation buttons on the camera body or by trans-
mitted commands). (੬ See page 24, 25.)
Ⅲ
SETUP MENU flow when the operation buttons on the camera body are used
SETUP MENU
–– ETUP MENU––S
VIDE ADJUST. .O
MODE SELECT . .
COMM NICATION. .U
END MEMORY
–– IDEO ADJUST––V
IRIS LEVEL NORMAL
NORMAL
NORMAL
COLO LEVELRU
ENHA CE LEVELN
AGC ODE 20dBM
SUPE AGC OFFR
BLC. OFF.
AVER GE:PEAK 8:2A
END
WH I T BALANCE A TWE
–– ODE SELECT––M
CAME A TEXT OFFR
V.PH SE 128A
AUTO START.. OFF
END
––CO MUNICATION––M
MODE
POINT to POINT
STYLE
DUPLEX
ID 1
END
(for setting the form of connection to the control signal connection terminals
on the camera body, etc. and for setting the communication mode, etc.)
੬ See page 26. ੬ See page 27.
੬ See page 29.
੬ See page 30.
Normal screen
BLC PRESET AREA
screen
BLC AREA EDIT screen
AWC screen
MANUAL WHITE
BALANCE
adjustment screen
(for setting functions related
to the video image of each
camera)
CAMERA TEXT
setting screen
AUTO START DEMO
screen
(for setting the operation mode
of each camera)
MEMO
The FUNCTION screen is not displayed
when operating the SETUP MENU using
the buttons on the camera body.
SETUP MENU Flow