41
AUTO PATROL Setting
The AUTO PATROL function allows you to
specify multiple positions (up to 6 positions)
that the camera will move to in the specified
order and observe for the specified interval.
The order of movement and observation in-
terval for the AUTO PATROL operation can
only be set by transmitting commands from
the RM-P2580, etc.
1.
Align the cursor (>) with the AUTO
PATROL item on the FUNCTION
screen. Then press the SET button.
• The AUTO PATROL setting screen
appears on the monitor.
The PATROL1 to 6 items indicate the
AUTO PATROL operation order.
PATROL1: Specifies the first position
number and the observation
interval for AUTO PATROL.
PATROL6: Specifies the last position
number and the observation
interval for AUTO PATROL.
2.
Press the PAN/TILT control lever up (6)
or down (7) to align the cursor (>) with
the PATROL No. item to be set.
…
– FUNCT ION–––
POSI ION TEXT EDIT..T
POS. EXT LOC . UP– LT
AUTO PATROL
..
AUTO PAN MODE PAN
ALM. EXT SIZE DOUBLET
END
FUNCTION screen
HOME
POSITION 5
POSITION 4POSITION 3
POSITION 2POSITION 1
AUTO PATROL (Factory setting)
SETUP
MENU
SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE
CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO
F-1
F-2
F-3
PAN/TILT
LENS
CAMERA/POSITION
CAMERA
POSITION
REMOTE CONTROL UNIT
RM-P2580
ALARM
PO
WER
KEY LOCK
PAN/TILT
control lever
POSITION
button
AUTO PATROL
button
SET button
MENU
button
(RM-P2580)
